High Grade Naphthenic Rubber Oil (Rubber Plasticizer)Go Back
KN series products take karamay Sinkiang low condensate naphthenic crude oil as the raw material, adopts atmospheric vacuum distillation to cut out the appropriate fraction, and produce the ultimate aim product via three sections and processes of high pressure hydrogenation process. All of these make the product contain higher cycloparafin hydrocarbon content and extremely low aromatics content, and make the color achieve saybolt color number over + 30. It is very suitable for rubber products in high request of color and adhesive products.
KNH series products take paraffin base crude oil of karamay sinkiang or low condensate naphthenic crude oil as raw material, adopts atmospheric vacuum distillation to cut out the appropriate fraction, and produce the ultimate aim product through the combination process of three stages of high pressure hydrogenation and aromatic saturation hydrogenation.
-
KN4006
High Grade Naphthenic Rubber Oil (Rubber Plasticizer)
Density:897.6
40℃ Kinematic Viscosity:54.28
100℃ Kinematic Viscosity:6.242
KN4006
-
KNH4008
High Grade Naphthenic Rubber Oil (Rubber Plasticizer)
Density:883.4
40℃ Kinematic Viscosity:104.7
100℃ Kinematic Viscosity:9.218
KNH4008
-
KN4010
High Grade Naphthenic Rubber Oil (Rubber Plasticizer)
Density:901.4
40℃ Kinematic Viscosity:172.9
100℃ Kinematic Viscosity:10.51
KN4010
-
N4016
High Grade Naphthenic Rubber Oil (Rubber Plasticizer)
Density:907.3
40℃ Kinematic Viscosity:406.6
100℃ Kinematic Viscosity:16.75
N4016
- Product Feature
- Consideration
- Main Application
-
Low pour point and excellent low temperature fluidity, free of any coagulant
Low aromatic residual, high naphthenic content and good solubility
Stable carbon skeleton, reasonable hydrocarbon composition
Deeply refined, good solubility with rubber
-
All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
Storage & Preservation: It must be placed in cool and ventilated place. Insolation and moisture are prohibited.
-
KN series is mainly used for the processing of rubber products that require photothermal stability. It is widely used as filling oil in synthetic rubber and operating oil in downstream rubber products industry. It plays the role of mutual dissolving with rubber, mixing soluble materials and softening rubber.
KNH series are mainly used for processing the green environmental protection rubber products in high requirements of the thermal stability properties. Due to its extremely low aromatic hydrocarbon content, it is safe for manufacturing life daily rubber products. Also it plays the role of enhancing the mutual solubility of compound and rubber, helping to dissolve mixed materials, and softening rubber to increase elasticity.